電梯門套是由兩個部分門套構成的：

The elevator door frame is composed of two parts:

一部分是電梯構造自身的鋼門套，也是我俗稱的“小門套”。

Part of it is the steel door frame of the elevator structure itself, also known as the "small door frame".

一部分是由裝飾材料做的裝飾門套，也就是我們大多數設計師認為的電梯門套。

Part of it is a decorative door frame made of decorative materials, which is what most designers consider to be an elevator door frame.

電梯門套與裝飾門套到底有什么區別呢

What is the difference between elevator door frames and decorative door frames

從材質上看：電梯門套一般是鋼框，而裝飾門套可以是各種各樣的材質。

From a material perspective: Elevator door frames are generally steel frames, while decorative door frames can be made of various materials.

從位置關系上看：普通門套靠近室內空間，而電梯門套靠近電梯井。

From a positional perspective: ordinary door frames are close to indoor spaces, while elevator door frames are close to elevator shafts.

注：采用鍍鋅鐵皮封堵是為了避免電梯上下產生外力，對電梯門套結構造成破壞。

Note: The use of galvanized iron sheet sealing is to avoid external forces generated by the elevator up and down, which may cause damage to the elevator door frame structure.

從功能上來看：裝飾門套是為了滿足室內空間的美觀性，而電梯門套則是滿足樓梯層門的功能性而存在的。為了保證電梯門套的美觀性，我們通常會用采用裝飾門套包裹住電梯門套的構造做法來對電梯門套進行處理。

From a functional perspective, decorative door frames are designed to meet the aesthetic requirements of indoor spaces, while elevator door frames exist to meet the functional requirements of staircase doors. To ensure the aesthetics of elevator door frames, we usually use the construction method of wrapping elevator door frames with decorative door frames to treat elevator door frames.

因此，在已經完工的項目中，我們是看不見電梯門套的。

Therefore, in completed projects, we cannot see elevator door frames.

而從設計制圖的角度上來說，電梯門套主要是由建筑單位繪制的，裝飾門套是由我們繪制，所以，在我們繪制電梯相關節點時，應查閱相對應的土建圖紙，看看土建的門洞與裝飾的門洞是否能夠?qū)?，再進行下一步行動。

From the perspective of design drawing, elevator door frames are mainly drawn by the construction unit, while decorative door frames are drawn by us. Therefore, when we draw elevator related nodes, we should refer to the corresponding civil engineering drawings to see if the civil engineering door holes and decorative door holes can correspond, and then proceed to the next step.